Easton 5MM Axis Carbon Arrows 500 Spine 2-Inch Blazer Vanes 6 Pack

The Easton 5MM Axis 500 arrow package provides six factory-fletched carbon arrows configured for bowhunting and other field archery applications. Each arrow uses a small-diameter, high-strength carbon-composite shaft with a black finish. The reduced 5mm profile presents less surface area than a conventional larger-diameter shaft, helping the arrow remain manageable in crosswinds while supporting the penetration characteristics hunters expect from the Axis platform. This exact configuration has a 500 spine rating, an 8.1-grain-per-inch shaft weight and a 31-inch stock shaft length. Its 0.204-inch inside diameter accepts Easton’s compatible 5mm components, giving archers access to a broad component system when tuning an arrow setup for a particular bow and broadhead combination. A straightness tolerance of ±0.003 inch supports consistent shaft alignment across the six-arrow package. These arrows arrive factory fletched with 2-inch Blazer vanes, eliminating the need to install vanes before basic setup and tuning. Pre-installed 5mm X Nocks provide the nock interface, while compatible 5mm HIT inserts are supplied loose for installation after the shafts have been inspected and cut to the required finished length. Field points and broadheads are not part of this configuration, allowing the archer to select the appropriate threaded point based on the intended setup. Because proper arrow spine and finished length depend on draw length, bow type, draw weight and point weight, shaft selection and final assembly should follow Easton’s sizing guidance or the recommendations of a qualified archery shop. This six-pack is a practical choice for bowhunters seeking a matched group of small-diameter, fletched 500-spine carbon arrows that can be finished and tuned for an individual compound-bow setup.

Specifications and Features:

• 500 spine fletched hunting arrows
• 5mm small-diameter carbon-composite shafts
• Factory fletched with 2-inch Blazer vanes
• 31-inch stock shaft length
• 8.1 grains per inch shaft weight
• 0.204-inch inside diameter
• Straightness tolerance: ±0.003 inch
• Pre-installed 5mm X Nocks
• 5mm HIT inserts included loose
• Color: Black
• Quantity: 6 arrows
• Brand: Easton
• Series: 5MM Axis
• Product Type: Carbon Arrows
• Manufacturer Part Number: 419390
• UPC: 723560193905